Honeywell 16 in Modulating Automatic Round Damper - MARD16
Item #: MARD16
The Modulating Automatic Round Damper is a round damper with a 24-Vac, floating-control type modulating motor for bypass and zone damper control. It is constructed of 22-gauge galvanized steel and has male (crimped) and female (uncrimped) ends to connect to any rigid or flexible round duct. It is available in 5, 6, 7, 8, 9, 10, 12, 14, 16, 18 inch diameter sizes. The motor timing is 90 seconds open to closed. The MARD is used for bypass control when connected to the Static Pressure Switch (SPC). Although it can be used on any bypass application, it is recommended for systems larger than 2000 cfm. The MARD can also be used as a zone control damper connected to a zone control panel.
- Uses 90-second open to closed motor.
- Can be used as a zone damper.
- ML6161 is replacement motor.
- Available in 5, 6, 7, 8, 9, 10, 12, 14, 16, and 18 in. diameter sizes.
- Used with Static Pressure Control (SPC) for bypass applications.
Honeywell Zoning - Helpful Tips:
To learn more about this brand visit our Honeywell brand page.
On average HVAC is 65-75% of your monthly utility bill. According to the manufacturer, by using this zoning product you can reduce this part of your utility bill by 30%.
Installation of a Zoning System provides substantial savings over installing an additional HVAC or "split" air-conditioning system. Additionally one unit compared to two saves money in operating costs and energy. Maintenance costs are also decreased when comparing the expense of replacing dampers to the inevitable replacement of a furnace or air conditioning unit every 10-15 years.
|Application||Motorized Bypass or Zone Damper|
|Size (in.)||16 in. diameter|
|Size (mm)||406 mm diameter|
|Damper Type||Single-blade, round|
|Motor or Actuator Mounting||Side or Top|
|Motor Timing||90 seconds|
|Wires to Motor||3|
Overall Rating for Honeywell 16 in Modulating Automatic Round Damper - MARD16
|(no reviews)||Be the first to rate and review this item|